When it comes to securely mounting your MotoTote carrier, stability is everything. That’s where the ZeroWobble+ Hitch Bolt comes in. Designed to eliminate any movement between your MotoTote and the vehicle’s hitch receiver, this small but critical component plays a major role in ensuring a smooth and secure transport. However, achieving its full effectiveness depends on proper installation.

How the ZeroWobble+ Hitch Bolt Works

Unlike standard hitch pins that simply hold a carrier in place, the ZeroWobble+ Hitch Bolt is engineered to eliminate gaps and prevent movement. It does this by threading tightly into the hitch receiver and applying pressure that locks the carrier in place. But for it to work as intended, it must be installed correctly—it’s not just about securing it, but about closing all the gaps.

The Key to Proper Installation: Closing All Gaps

To properly install the ZeroWobble+ Hitch Bolt, check out our installation video. The effectiveness of the ZeroWobble+ Hitch Bolt comes down to the recessed nut design.

Here’s what you need to know:

1. The nut must recess fully into the hitch pin hole – This is crucial because it allows the bolt to fully engage with the receiver’s internal walls, ensuring a tight fit.

2. Tighten until no movement is possible – Once the nut is properly positioned, tighten the bolt until all gaps are eliminated. This prevents any shifting, reducing vibrations and unwanted carrier movement.

3. No loose connections – A loosely installed bolt can still allow minor movements, which can lead to instability and excessive wear over time. Ensuring a fully tightened connection means your MotoTote stays secure, even on rough terrain.

Why Proper Installation Matters

A properly secured ZeroWobble+ Hitch Bolt means peace of mind. With no shifting or movement, you can focus on what really matters—enjoying the ride. Instead of worrying about whether your bike is secure, you can hit the road with confidence, knowing your MotoTote is locked in place. Our goal is to help you get there effortlessly so you can enjoy the adventure ahead.

The ZeroWobble+ Hitch Bolt is more than just a fastening component—it’s the key to a wobble-free, ultra-secure MotoTote experience. By ensuring that the nut is fully recessed, all gaps are eliminated, and the bolt is tightened completely, you can maximize stability and eliminate unwanted movement.

Take the extra moment to install it correctly, and you’ll enjoy a smoother, more secure ride every time.

For more tips on securing your MotoTote carrier, visit our support page or contact us for expert advice!